|
Product Details:
Payment & Shipping Terms:
|
| Type: | Drag Chain | Material: | Plastic |
|---|---|---|---|
| Mode: | 15-20mm | Application: | CNC Machine Tools |
| Feature: | Wear Resistance | Temperature Range: | 40C-130C |
| High Light: | cnc cable chain,wire drag chain |
||
TL open type Stainless Steel Aluminum Cable Chain. The main body of the Steel Aluminum Cable Chain is composed of chain plate, support plate and shaft pin. The chain plate is galvanized, with novel appearance and reasonable structure. There are three types of support plates, including Integral Type, Split Type and Frame Type. The support plate is made of Aluminum Alloy, and the separator is made of Nylon. There are white and black options. This product has good rigidity, does not deform, and is easy to install. It uses abrasion-resistant materials to improve the abrasion resistance of the product and is more flexible in bending. The appearance is exquisite, which can greatly enhance the overall artistic appearance of the machine tool equipment.
Material and Performance
Material: Stainless steel,steel, good toughness and wear resistance
Operating Life: Under normal use, up to 5 million reciprocating motion.
Drag Chain Selection
High: Select the built-in cable, tubing, the trachea and conduit maximum height for reference, the height of the drag chain at least 10% of the remaining space.
Wide: Choose the built-in cable, tubing, trachea, the sum of its outer diameter for reference, the width of the drag chain at least 10% of the remaining space.
Drag Chain Size
| Steel Cable Drag Chain Parameter Table | ||||||
| Type | TL45 | TL50 | TL65 | TL75 | TL80 | TL95 |
| Pitch (mm) | 45 | 50 | 65 | 75 | 80 | 95 |
|
Bending Radus (mm) |
R50 | R50 |
R75/R90/R115 /R125/R145/R185
|
R75/R90/R115 /R125/R145/R185 R200/R250/R300 |
R100/R115/R125/ R145/R185/R200/ R250/R300 |
R115/R125/ R145/R185/R200/ R250/R300/R400 |
|
Outer Height (mm) |
30 | 35 | 44 | 50 | 55 | 70 |
|
Maxium and Minimum Outer Width (mm) |
1,Minimum support width 50; 2,TL45/50/65/75/80 masximum supoort of is not more than 4 times the pitch; 3,TL95 maximum support no more than six times the pitch |
|||||
| Support Plate Type | we have three plate types to choose,I.integral type;II, separate Type; III, Frame Type | |||||
|
Support plate Maximum Aperture (mm)
|
15 | 35 | 35 | 35 | 35 | 55 |
Contact Person: Ms. Ada Yang
Tel: 86-18032726169
Fax: 86-317-2016816
